How do you set the flow control mode for the home water heater / hot water cycle energy saving equipment?
So cycle. Note: 1, automatic temperature control mode default setting parameters: (1) setting temperature: 42 C; (2) the work of NO:08 delay 3:30 seconds; (3) temperature control and time: as early as 6:00-8:30; 11:30-14:30: 18:00-23:30; late night (when setting off time can not exceed 23:59 (0:30 is not figurative). 2, the early, middle and late three time set into continuous state, that is, all-weather automatic temperature control mode. 3, timing automatic temperature control mode, set accurate Beijing time, time settings, please see Dr. home hot water cycle energy saving equipment / backwater device, how to set temperature / Beijing time / fluctuation delay? . 4 、 the timing automatic temperature control mode is suitable for users who have buried pipes.
After the setting is completed, press the "time" button to switch the timing automatic temperature control mode and the automatic temperature control mode. Enter the timing automatic temperature control mode, the interface has [] (clock) logo. If the current time in the set of timing, automatic temperature control within the time range, the interface will have [[ring] of the signs prompt. 6, when the ambient temperature is the temperature sensor [] sensed equipment inlet temperature is lower than the set temperature of 5 DEG C [] when the equipment begins to work; when the temperature reached [] [] set the temperature when the equipment stops working.
In the main interface to enter [mode] subtitle flicker settings state; 2, then press [] key to enter the timing automatic temperature control early, middle and late setting; 3, according to [3] numerical or [you] button to adjust the time; according to the [mode] [minutes] and [switch] seconds set up; 4, in the process of setting up, press [] key to switch the timing of early, middle and late each time setting;
