How do you strengthen the glass and use the equipment?
Equipment needed:Reinforced furnace and portrait machine.Hardening furnace1 Characteristics: mature technology, unique design concept, unique suction wind circulation heating mode, heating speed, the equilibrium temperature of equipment, improve product quality and yield, both sides of the door, on both sides of the upper cycle work, can make full use of space, high yield, energy saving, time saving and labor saving.2, principle: the use of EVA film of hot melt and vacuum negative pressure, cloth, paper, film and other substances and glass closely glued, thereby producing a variety of reinforced glass.
Ordinary annealed glass first cut into required size, and then heated to the softening point of 700 degrees, then rapid and uniform cooling of the glass (usually 5-6MM at 700 degrees high temperature heating about 240 seconds, 150 seconds of cooling. 8-10MM glass heating at 700 degrees high temperature for about 500 seconds, cooling about 300 seconds. In short, depending on the thickness of the glass, the choice of heating and cooling time is also different. After tempering, uniform compressive stress is formed on the glass surface, while tensile stress is formed inside the glass to improve the bending and impact strength of the glass. The strength of the glass is about four times higher than that of the ordinary annealed glass. Have good tempered glass, can no longer be any cutting, grinding or damaged, otherwise it will damage due to uniform compressive stress balance and smashed to pieces".
3, application: a wide range of uses, can be enhanced production of laminated glass, wired glass, dry laminated glass, art glass, crystal photo studio photo, bullet proof glass, glass doors, closet landscape wall partition.Photo machineThe photo machine uses a spray head to spray all kinds of color patterns on the special materials. In fact, it is a large format printer. Generally used in advertising, graphic, CAD industry, before 2004, mainly imported machinery. Portrait machine according to sprinkler technology mainly divided into 2 categories: piezoelectric photo machine and hot foam photo machine.
