How does an electric drill break the pipe in the wall?
Water pipe damage treatment: 1, the damage will be excavated. 2, if the metal pipeline, it can be welded treatment, excavation area can be smaller, can welding operations (hole diameter of about 30 can be). If the material for the aluminum plastic, the excavation area is large, can be replaced to deal with this paragraph. But the excavation quantity is large and the processing is complicated. If the hole is small, it can be wrapped with high elastic rubber, covered with holes, and then tightened with metal clamps. Note that the hoop shall be embroidered. There is also a way to use cold repair, with plugging glue stick to plug the leak point, and then with the tie tape, multilayer winding, curing can be.
For home decoration, installation hooks, pylons and so on, it is easy to break the water pipe. This situation must be dealt with. Generally, pay attention to the direction of the pipe before drilling, so as to avoid the occurrence of such a situation. The direction of the water pipe from the outdoor into the house, generally in the ground, and then branch to the room, from the main branch to the branch point, generally buried in the floor, there are wall position, post wall level, go to the water point, and then vertical to the use point.
The knock on the wall face of the amputated damaged part, plus connector, check to make sure no Water Leakage, with high-grade repair mortar.
