In the lower left corner of the computer, click "Start" → "All Programs" → "EPSON" → "EpsonScan" → "Epsonscan Settings". open the EpsonScan settings will be "local" modified to "network". Click "Add" will automatically search the IP address of the all-in-one, click the IP address with the mouse, and then click "OK" to complete the setting. Note: If you can not search the IP address of the whole machine, click "Enter IP Address" to complete the IP address. If your printer is connected through the network cable, open the EpsonScan settings and change the "local" to "local". Security above the practice done a few times or no use, more urgent demand
It is estimated that a digital TV line a connector (the most common is the TV and the wall TV box cable) contact is not good, resulting in some abnormal frequency indicators, set-top box error rate is too high can not be resolved. Solution: Turn on the TV and set-top box: . if the TV screen appears set-top box to start the image and then prompt "no signal" case, this phenomenon proves your set-top box and TV between the audio and video lines (red, White) connection is basically no problem. TV radio frequency input signal line (Note: not that yellow and white that three) did not receive the set-top box RF input port. The TV RF input signal cable is not connected to the terminal box on the wall. Other places of disconnection. . if the TV screen does not appear set-top box to start the image, then just the blue screen and no text prompts, then that is the TV channel settings there is a problem. Please use the remote control of the TV to press the source key or the AV / TV button to switch the TV from the analog TV channel to the video channel. . first check the set-top box before the power light, if not bright, check the set-top box power plug is not plugged (to ensure that the socket has electricity) or check the set-top box switch is not open. . if there is no such problem. Is the set-top box power is broken, to the designated maintenance office (you can call the radio and television customer service hotline asked) to take maintenance.
what kind of insulated wire? A: There are several commonly insulated wires: PVC insulated wire, PVC insulated cord, nitrile PVC insulation insulated cord, rubber insulated wire, agricultural underground buried aluminum core plastic insulated wire, rubber insulated cotton yarn Textile cord, PVC insulated nylon jacket wire, power and lighting with PVC insulated cord
2 possible 1. digital TV provider of the problem, which you find the supplier to solve 2. their own line contact problems, you sell a few plugs, re-take it like
