How does the gypsum wall find the keel position precisely?
If your home workers in the decoration according to the standard to the construction, then the vertical spacing between the keel should be about 400mm.
You can according to this distance from the nearest side of the load-bearing wall, according to the pitch of 400mm plus 50mm light steel keel side width calculation (that is, 450mm), in the nearest place from the painting can be used small nails through the gypsum board Detect the specific position of the keel.
With a small nail to detect the words will not leave too much hole in the wall, but also easy to fill the maintenance.
There is a painting of the nail is best to use screws or threaded floor nails, ordinary nails easy to fall off.
Light steel keel wall is generally no horizontal keel, and only through the keel, the general height of 1.5 meters to wear a you through the height of the keel is difficult to determine, and it is difficult to punch in the above fixed painting, and only in the vertical keel Above the next nail fixed painting.
Light steel keel, is a new type of building materials, with the development of China's modernization drive, light steel keel is widely used in hotels, terminals, bus stations, stations, playgrounds, shopping malls, factories, office buildings, old buildings Building renovation, interior decoration, roof and other places. Light steel (paint) keel ceiling with light weight, high strength, to adapt to water, shock, dust, noise, sound absorption, constant temperature and other effects, but also has a short duration, easy construction and so on.
Gypsum wall to find the location of the keel location:
(1) The vertical spacing between keels is about 400mm, and the distance from the nearest side of the load-bearing wall can be calculated from the distance of 400mm and the width of the side of the 50mm light steel keel (that is, 450mm) The nearest place can be used to detect the specific position of the keel through the gypsum board with a small nail.
(2) There is also because the gypsum wall in the keel are generally used light steel keel, so you can use the magnetic magnet to find the location of the keel.
