How does the paver start?
Specific depends on the paver you use brand models, as well as the construction site specific circumstances, mostly rely on experience to determine the specific thickness and thickness of the padElevation
Under the ironing board, around each pad a piece of wood, the thickness of the board may be loose shop height, around the ruler to pine shop minus 2 height, such as pine shop 25 cm, to 23 cm on it. The rammer is adjusted, and the probe and the longitudinal slope instrument are adjusted according to the requirements.
How do you start? First of all: whether you are domestic or imported! Starting, you need to fix the machine, that is, to correct the parameters. This is the most important. The parameter is incorrect, you are not correct! Second, you should know the unit data! How many digits or laps do you dial on the 1cm chart?! Third to see whether you are water stable or oil layer?! Don't be afraid if the water is steady! Tune 4-5cm, walk on 2-3m and watch! Re tune! If the error is large or 4-5cm tune, if the error is not big, 1cm tune! Finally, the 5mm tune! General machine 3mm or so, no response! If the reservoir is 1cm, the unit begins to adjust! Finally, don't be afraid! Be bold! The shop broke down and gave the peasant workers a pack of cigarettes! Let them shovel it! We re shop!
You have to look at the specific use of paver brands, models, and the specific circumstances and requirements of construction site construction technology, mostly rely on experience to judge, for example, paving thickness, plate thickness, paving material, elevation height, different conditions of different adjustment etc.. For reference only.
Adjustment procedure of paver starting:Starting, you need to fix the machine, that is, to correct the parameters.You should know the number of units, that is, how many digits should be transferred on the 1cm table or how many turns should be transferred.Water stable or oil layer, water stable, then tune 4-5cm, go to 2-3m, and then observe the next tune. If the reservoir is adjusted in 1cm units.Most of them depend on experience, such as paving thickness, pad thickness, paving materials, elevation angle, different working conditions, adjustment and so on.
