How does the platform maintain
Remove and disassemble the valve, and remove the valve core and remove it from the new installation. Put all the hydraulic oil in the tank into the tank, remove the oil absorbent filter, and put it back in the tank. The oil tank refilled with new oil.
Inspect hydraulic oil and oil level. The hydraulic oil should be 40 to 50 mm above the tank when the platform rises to the highest. When the oil is dark, the oil is sticky, or the oil has grit and other foreign things, the hydraulic oil should be replaced in time. The hydraulic system of lift platform applies 32 # hydraulic oil. A. check the hydraulic and pipe joints. The pipe is damaged and should be replaced immediately. Tighten the joint when the connection is loose.
The person who is in the maintenance of the platform is in the inner work of the elevator, must be suspended to prevent the sudden descent of the platform and cause the casualties. Check roller, shaft, and bearings; Cylinder pin shaft and bearing Lubrication and wear of arm hinge shaft and bearing; The components are lubricated with oil. Extended bearing service life.
