How does the single-chip step motor drive connect
The public is at the top of the > The pulse signal - - - >, a series of small resistors and a single chip output pulse The directional signal - - - > - a series of small resistance to a single chip With the above 3 lines can control the step motor moving, the electricity, the machine is automatically locked, if you still need to control stepping motor lock and release, the release signals to pick up a motor, connected with the pulse signal
The public, the geodesic, doesn't have to be explained. And it doesn't have to be explained, which is to control the rotation of the motor. There's no negative number of pulses. In fact, I think that's what it is. Motor release to say is, if the effective signal, means that the motor in a controlled state, then step pulse signal output, the motor will have action. Otherwise, the pulse signal output, the motor does not move The step pulse signal is ultimately useful, how many pulses you give to the motor, and how many pulses the motor will go.
Of course, there are more detailed instructions in the subdivision Settings, for example, if you subdivide the coefficients by 16, then you send 16 impulses to the Angle of a pulse.
