How does the solar panel produce it yourself?
?Step 5: Assemble the battery Place the titled titanium dioxide film face up on the table, drop one or two drops of electrolyte containing iodine and iodide ions on the membrane, and then press the conductive surface of the counter electrode down on the titanium dioxide film The The two pieces of glass were slightly staggered so as to use the exposed portions as the electrodes for testing. Use two clips to hold the battery, so that your solar cell is made
Step 4: Add Electrolytes Use iodine-containing solutions as the electrolyte for solar cells, which are mainly used for the reduction and regeneration of fuels. One or two drops of electrolyte can be added to the surface of the titanium dioxide film.
?The third step: the production of counter-electrode batteries need positive electrode, of course, also need anti-electrode. Positive electrode and counter electrode, is made of conductive SnO2 film layer composition, the use of a simple multimeter to determine the side of the glass can be conductive, the use of fingers can also make judgments, the conductive surface is more rough. The non-conductive surface marked with '+', and then use a pencil on the conductive surface evenly coated with a layer of graphite.
?The second step: the use of natural fuel for the titanium dioxide coloring, the fresh or frozen black plum, plum, pomegranate or black tea, with a tablespoon of tax for extrusion, and then put the titanium dioxide film for coloring, about 5 Minutes until the film becomes dark purple. If the two sides of the film coloring uneven, you can put in the soak for 5 minutes, then rinse with ethanol, and gently wipe with soft paper.
Titanium Dioxide Film The titanium dioxide powder was first put into a mortar and ground with a binder. The film was then slowly dried on a conductive glass with a glass rod. The titanium dioxide film was sintered in an alcohol lamp for 10 to 15 minutes and then cooled The
