How does the vacuum oil filter remove moisture and loss?
Strong wind condenser and vacuum buffer chamber, water vapor and condensable gas are condensed and removed by drainage device. Non condensable gas is discharged by vacuum pump. Finally, the oil, which removes water, gas and mechanical impurities, is pumped into the precision filter by the oil pump to remove the particulate impurities in the oil, which is clean oil and complete the whole oil purification process.
Because the water diversion filter uses enhanced hydrophobic interaction technology, improve the oil-water interface, the tiny drops of oil in the accelerated motion, and coalesce into large droplets separated out from the oil, the precipitation in the water reservoir. Then enter the three-dimensional vacuum flasher to remove impurities in oil, in the spray device under the action of the dispersed oil mist sprayed into the three-dimensional flash Bauer ring, forming a thin film of oil (0.025mm thickness), oil film curve downward, greater aeration area and aeration time lag process, separation process and demulsification, dehydration and degassing of the full. A mixture of vaporized water vapor, light hydrocarbons, etc gas enters a water vapor separator
When the oil purifier is working, the filtered oil will enter the electric heater under the influence of the outside atmosphere and vacuum suction. After heated oil enters the strong magnetic filter, large particles of impurities are filtered out, oil containing small impurities enters the two stage filter and is filtered again, and then the oil enters the coalescence filter.
