Home > categories > Hydraulic & Pneumatic > Water Pump > how hard is it to replace a water pump on a 1992 jeep cherokee larado?
Question:

how hard is it to replace a water pump on a 1992 jeep cherokee larado?

i was coming home from from work and my jeep thew the serpenteen belt and my water pump is the only pulley not moving good like the rest and is leaking coolent. and people with just dump **** to say dont comment on this

Answer:

With either engine your jeep cherokee would have a 2.5 or 4.0. Both have the same pump, and the 2.5 would be easier because you would have more space from the smaller engine. But there not hard to replace. A repair manual would be help full if you have never replaced a water pump before.
1st off juan needs to get a life. now to help you .buy a haynes manual so you can go and do the removal and replacement of your water pump. step 1) remove the fan shroud 2) drain the coolant. make sure you do this so your critters won't drink it 3) remove the radiator. 4) remove the fan but do not remove the belt. this helps keep the fan from moving while you remove the bolts. if you have an electric fan remove this at the same time you remove the radiator 5) referring to the haynes manual remove any accessories that might be attached to the water pump 6) remove the pump. please refer to the haynes manual to insure you do the removal and re-instal correctly. oh yea, don't get fustrated . if you do just take a break. good luck and happy jeepin

Share to: