How is the bearing capacity of the warehouse determined?
This can only be measured empirically, the load code, and no definite data. According to your statement, if the whole ground is stacked like this, it is OK to press 3t/m^2 to design. Keep it a little bit, just press 5t/m^2. But these are experiential values. However, even if the ground bearing capacity of large number does not matter, because of much larger capacity in general warehouse column foundation for foundation, generally more than 10/m^2, so that you in the warehouse ground bearing capacity is enough, unless you deal only in the column foundation under the ground treatment, but not warehouse ground area, but generally do not.
The carrying capacity of the circulation warehouse must also be sufficient for the operation of the heavy duty forklift truck.
The number of multi-storey warehouse increases, the ground load capacity has been reduced, the first layer is 2.5 to 3 tons, the two layer is 2 to 2.5 tons, the three layer is 2 to 2.5 tons, the four layer is 1.5 to 2 tons, and the five layer is 1 to 1.5 tons, or even smaller.The load capacity of the ground is determined by the weight of the goods to be kept, the total weight of the loading and unloading machines, and the span of the floor frame.
The construction of the ground floor is mainly compressive strength, the ground bearing capacity necessary to carry the goods according to the type or the stacking height of concrete research.Usually, the average carrying capacity of plain warehouse is 2.5 to 3 tons, followed by 3 to 3.5 tons.