How is the interior trim of the car door?
It is recommended that if you want to disassemble yourself, first to the Internet to view the vehicle interior trim removal of the relevant steps and precautions and the necessary tools, not very clear is not to do anything without authorization.
Tools: flat screwdriver, 8 socket wrench
step:
1, with a flat screwdriver down to pry open the door handle lower trim, from the middle down and then pull out (the back door is the pry half of the front)
2, remove the handle under the veneer can be seen after the internal two black eight hex bolts, with a socket wrench down
3, unplug the window lift switch plug (which has a clip, use your fingers from the back hook to pull out)
4, with a flat screwdriver from front to back pry open the door handle trim panels, remove the door when the handle
5, hand the door trim below the mouth a little open a gap, and then put a wrench into the pry, that the interior board is a plastic card with a plastic card buckle on the door, the pry when the time to use a little effort, One by one pry. If you want to wrench the plastic interior trim bad, you can use a little steel bars and the like, but not too thick, or can not reach into.
6, a lap card bamboo shoots all pry open, hold the door trim board can be removed from the bottom up
I simply talk about it, but do not easily do it yourself, do not do it.
The interior trim and the door are fixed by screws and door clamps. First remove the screws that secure the interior trim panels and use the professional tools or the word screwdriver to tap the edge (except the top of the trim panel, the rest of the three Side are fixed by the clip, the spacing of about 10 centimeters one, the card will be forced out of the pry open, all the cards pry open, the door trim will move up to remove it, see To the inside of the connection line, etc. (under normal circumstances need to buy a card, because in the process of your pry may be damaged card)
