I choose the window stone is quartz stone, paste this stone with what material? Is it gypsum powder and putty powder? Or with cement and sand or glue? If glue, what kind of glue? thank you all!
1, the best floor tile and a piece of installation. If not installed at the same time, leaving the depth of the stone to ≥ 40MM
2, first installed threshold stone, and then install the door frame. First inside and outside.
3, with the wood floor connected with copper stripes.
4, light-colored transparent stone, the following can not ordinary cement. Use white cement. Such as directly in the wood base shop, ready to glass glue can be.
5, the general is the decoration company's tile factory installed by the installer size.
Generally speaking, 1: 3 cement mortar is used in 1 unit weight of cement and 3 units of weight sand, in fact, ignore the water composition, generally about 0.6 ratio, which should be 1: 3: 0.6, the density of cement mortar 2000Kg / m3.
The window stone is glued to the windowsill with cement mortar.
By the cement, fine aggregate and water, as well as the need to join the lime, active admixture or admixture in the field of the mortar, divided into cement mortar and cement mortar.
In the windowsill light places, to consider the aging of the bonded material; and then consider the artificial quartz stone is very dense, there is no problem of alkali, I think we can use cement as a bonding material. But quartz sand in the quartz sand although the resistance to ultraviolet radiation, but the bonded quartz sand bonding material (unsaturated resin) resistant to ultraviolet (anti-aging) may be a problem.
