Home > categories > Consumer Electronics > USB Flash Drives > How much memory does the U disk do with the system?
Question:

How much memory does the U disk do with the system?

How much memory does the U disk do with the system?

Answer:

XP system, more than U 2GB disk can,WIN7 system or above, if you use the GHOST version, it is recommended more than 8GB, the original image above 4GB
You can make the disk PE, and the GHO file on the hard disk, so long as the 1G is enough! However, if GHO is placed in the U disk, it will have to be bigger, and 2G will be OK ~ ~!
The general 4G U disk is enough.1, make the startup disk. (W7 4G XP 2G U disk, U disk) U download depth U disk boot production tools, software installation, startup, follow the prompts to make good startup disk.2, download a win7 system, compressed system file decompression (type ISO system files directly to the U disk) to your production of U disk, boot disk is ready.3 、 install the system with U disk. Insert U disk boot, press DEL or other key to enter BIOS, set to start -F10-Y- from USB, enter. Install the system as prompted.4, after the installation is completed, pull out the U disk, the computer automatically restart, click: start the computer from the local hard disk, continue to install.5, after the installation is completed, restart. Boot - enter BIOS- settings, the computer starts from the hard disk, -F10-Y- returns. Boot after boot from hard disk.
I don't know. What do you mean by this memory?Computer memory, it depends on what you want to install the system, the general WindowsXP, computer memory more than 256 on the line.U disk memory capacity, as you installed with the PE system, and now the general winpe are around 200MB, streamlined version of the 40MB, but the streamlined version of the lack of a lot of essential software, tasteless. With U disk loading system, in addition to this PE boot system also needs, the system's mirror file is generally 700M, so the U disk capacity of a G on it.Using this virtual CD-ROM UltraISO to start the disk is very simple. Tools for preparation: 1.U disk, 2.UltraISO, 3.win-pe, ISO mirror.1, first of all, U disk into the computer's USB interface (important note: the production process, U disk will be formatted, pay attention to backup data);2, run the attached UltraISO.exe program, select file / open, select WinPE_U.iso file;3, and then select Start disk / write to the hard disk image";4, in the "hard drive" project, you have to make a choice of U disk boot disk drive;5, in the "write mode" project, select USB-HDD+ or USB-ZIP+, personal advice to choose USB-ZIP+, compatibility is better;6, and finally click on "write", wait for a few seconds, the program prompts the completion of successful completion, you can pull out the U disk.

Share to: