How much pressure does the inverter plasma cutter need to pump the 150psi?
Inverter plasma cutting machine requires 0.7MPa air pressure is enough. So as to start the cutting machine running properly and blow the metal liquid in the cutting hole in time.
Yes, usually as long as the plasma can be started and the minimum starting pressure is above 0.5MPa
150psi conversion out, that is, 1Mpa, 10 air pressure, of course, can use, plasma use 4 gas or so on the lineIf you can move with a heavy workload, it is recommended to exhaust more than 0.9 cubic meters of the air pumpThe operation is very simple, close to the plate cutting line, finally used to cut the plasma, beginning at the edges of the plate, not to the middle (so it is not easy to hit the mouth)
