Home > categories > Home Appliances > Water Dispensers > How often does the water heater clean up?
Question:

How often does the water heater clean up?

How long does it take to clean the water dispenser in an ordinary family? How do you clean up?

Answer:

The third step: to the water pump into the tank 300 ml of multi-function disinfectant, soak for 10~15 minutes. Antibacterial Association experts commented: water dispenser cavity capacity of about 2 liters, a mere 300 ml disinfectant, can only disinfect the very limited water dispenser cavity space, such disinfection is invalid. The correct way: dissolve 300 ml disinfectant into the water of about 2 liters, and then fill the whole cavity for 10~15 minutes.Fourth step: turn on the water switch and clean the disinfectant. As mentioned above, the drinking water switch can only release part of the disinfectant, most of which remain in the cavity. If not discharged, it will become a new source of water pollution. The correct way: turn on all the switches of the water dispenser, including the drain pipe and the water switch, and clean the disinfectant.
Second step: clamp the alcohol and cotton, carefully clean the inner side and the inner side of the lining of the water dispenser and the cover.Expert of antibacterial Association comments: these parts of drinking water machine are easy to accumulate bacteria because of direct contact with air. Scrub with alcohol to remove the dirt and prepare for the next step of disinfection.The third step: to the water pump into the tank 300 ml of multi-function disinfectant, soak for 10~15 minutes. Antibacterial Association experts commented: water dispenser cavity capacity of about 2 liters, a mere 300 ml disinfectant, can only disinfect the very limited water dispenser cavity space, such disinfection is invalid. The correct way: dissolve 300 ml disinfectant into the water of about 2 liters, and then fill the whole cavity for 10~15 minutes.
The first step: Unplug the power plug, remove the bucket, open the water switch, put the remaining water in the water dispenser cavity.The first step is to release all remaining water in the dispenser chamber. However, we usually open the dispenser faucet, only a small part of the water release, so this method is very short. Antibacterial Association experts proposed the correct approach should be to open the fountain behind the sewage pipe net water discharge. Because the remaining water in the sewage pipe is the key to the two pollution of the water dispenser, and then turn on all the water switch to drain water.

Share to: