How the concrete mixer works
1) self-falling blender The inner wall of a self-falling mixer has curved blades. When the cylinder is rotated around the horizontal axis, the blade constantly elevating the material to a certain height, and then the free fall, blending with each other. (2) a strong mixer A strong mixer is mainly based on the shear mechanism. In a blender, there are blades that rotate in a stirring shaft. (3) the selection and application of mixers 1) type selection Concrete mixer should according to the project specific conditions (such as size, length of time limit for a project of quantities) and the requirements on the performance of concrete to be right choice. 2) the production capacity of the mixer is calculated The productivity of the blender is calculated in the following form: Q = 3.6, VK/t1t2t3 (m3 / h) Type t1, t2, t3 - for loading, stirring, discharging time (S); V -- the capacity of the blender; K - the utilization factor of each working time.
The concrete mixer can be divided into two categories: self-fall and strong. Self-falling concrete mixer is suitable for mixing plastic concrete. The stirring effect of a strong mixer is stronger than that of the falling mixer, which is suitable for mixing hard concrete and lightweight aggregate concrete. A concrete mixer is a machine that stirs a certain mix of sand, stone, cement and water into a uniform quality concrete that meets the quality requirements. The concrete mixer can be divided into two categories: self-fall and strong.
Mixed mortar mixer working principle of the machine work, inside the machine material subjected to two opposite direction of the rotor, with complex movement, the blades to drive the material aspects of tank wall along the machine counterclockwise, on the one hand, drive material turning around, overlapping the two rotor shape floating zone, within the region, regardless of the shape of the material, size, and density, can make material floating instant weightlessness, which makes the material in the machine groove omni-directional continuous loop turn, staggered shear each other, so as to achieve the effect of rapid mixing soft. Vacuum mixer manufacturer said, dual-axis mixer for continuous mixing of materials, mixing and conveying function, its working process is: the motor after electrify, through a triangle belt transmission, the big belt wheel rotation, through controlling the clutch into the working state, drives the stirring shaft of two relative rotation, the direction of the two shaft rotates by outside introversion, material is stirred up, formed by mixing blade rotates thrust material flow, spiral forward, into the mixing of the material for stirring, mixing, extrusion, homogenization, the final material to undertake by the leak container into the belt, and finally to the next processing equipment. The mixing of the material in the mixing tank shall be determined mainly by the Angle of the stirring and the Angle of the axis and the speed of the shaft.
