Hot and cold valve chaos, how can not screw out hot water, but the hot water pipe is hot
Operation of concealed thermostatic valve:1. The adjusting knob with temperature scale is the temperature regulating knob, and the other end is a switch knob.2 、 the switch knob is used to open and control the flow rate of constant temperature water outlet, turn the flow handwheel counter clockwise, open and adjust the large flow rate, rotate clockwise, adjust the small flow rate and even turn off.3. The temperature control knob is used to control the temperature of the mixed water. The knob is printed with a standard comfortable and safe temperature of 38 degrees. If the mixing water of higher than 38 DEG C needs to be rotated according to the direction of the temperature indication, if the water mixture is lower than 38 DEG C, the temperature regulating knob is turned in the opposite direction of the high temperature, so that the temperature can be lowered.4, start using the temperature knob to 38 degrees at the safe temperature.5, open the switch knob, thermostatic valve preferentially discharge cold water in the pipe, after the cold water is discharged, automatically adjust the water temperature to 38 + 2 degrees.
? with cold water, hot water, temperature: lift the handle, shower interface water, water temperature regulation through the left and right rotation handle, and when the handle to the left of the extreme position, it is completely hot water;Close: handle in water temperature range, press the handle to the minimum position for closing, at this time the shower interface is not out of water.
There are a variety of water intake valve of water heater, including mixing valve, thermostatic valve, flush with the thermostatic valve, the specific operation as follows:Mixing valve operation:Open and flow adjustment: lift the handle in the range of water temperature adjustment, shower interface outlet, and the amount of water will change with the angle of the handle;
