My son is 5 years old. I want to buy a raincoat for him. What should we pay attention to when we choose a raincoat? Thanks
Plastic raincoat sticking methodPlastic raincoat rupture, can be the first break aligned, covered with a piece of paper and glass, hot iron on it several times, each time not under pressure is too long, so that the glass paper not burned, and then glued the plastic below. The hole, you can use the same plastic cloth cut into the hole a little larger than a square or round, cover the hole above, then covered with glass paper, you can fill in the same heating method.Rubber raincoat odor to divide the rubber raincoat has peculiar smell, can be mixed with hydrogen peroxide into the water to soak the raincoat, dry smell will disappear.
Plastic raincoat wrinkle methodSlight wrinkle on the raincoat, it can be hung on the hanger, so that it naturally restore smooth. If the wrinkles are tight, the raincoat can be soaked in 70 degrees Celsius in the hot water for about 2 minutes, after taking out on the flat plate, and then dry the water mark, you can restore the formation, do not pay attention to pull.
Polyvinyl chloride (PVC): is often seen outside the jelly translucent plastic raincoat, this raincoat is cheap, but easy to damage.Nylon and polyvinyl chloride: nylon cloth is coated with a layer of PVC waterproof layer, the price is moderate, not easy to damage, is now the main material used for raincoats.Waterproof breathable fabric: fabric is the inner surface coated with a layer of waterproof breathable coating, like the police, climbers used GORE-TEX brand raincoats, waterproof breathable layer it has deposited 1 billion per inch square pores, these pores allow gas molecules to pass through, but can not make water molecules through the large, therefore is waterproof and breathable effect the disadvantage is the high price.
