Home > categories > Home Appliances > Water Dispensers > How to check the leakage of water dispenser?
Question:

How to check the leakage of water dispenser?

For a week, my protector always tripping and pushing on the trip, I have checked each appliance, and finally determine the drinking machine problem, I use a multimeter to the ground, and the water dispenser, skin is zero with no ground fire, check on after skin no electricity, due to occasional leakage, I want to know how to determine which parts of drinking water machine is broken? (socket work properly)

Answer:

As you say, it is likely to leak. You can double check the connecting water parts and water containers.The only contact with the electric heater in the water heater is the heating cup.Take apart the shell, and 1. check to see if there is any leakage.2. heating cup two wiring head is there water mark?
As you say, and probably leak, you can double check the connecting "water" parts and "water containers".Because of what you said, the normal drinking water heating, it should be caused by leakage
The leakage of the water dispenser may be due to the long time heating of the hose and the binding band, the relaxation of the elasticity, the relaxation of the gap between the inlet hose and the heating device, and the formation of water seepage and flow to the circuit, causing leakage. Cut off the power supply, remove the cover of the water cooler, change the tie belt or hose, wipe the water out and dry. Check the line and get rid of the trouble spots. It can continue to be used for some time, but it is not safe. It is better to ask a professional repair master to repair or replace the water dispenser directly.
3. the thermostat wiring head whether there is traces of water?Occasionally leakage is usually caused by leakage and short circuit.If it is not leaking, then see if the temperature controller is dusty or dusty and short circuitedClean up can be normal drinking water heating, it should be caused by leakage

Share to: