How to choose furniture appliances?
The selection of furniture needs to check whether the flat floor furniture legs. This point is placed flat on a glance, some furniture only three landing legs. Take a look at the desktop is flat, not bow back or collapse of the waist. The top of the table is raised, and the glass plate can be put on the circular surface; the concave surface of the tabletop is put on the glass plate, and a pressure is broken. Check the door, drawer joints can not be too large, should pay attention to the horizontal and vertical, Siemens does not sag.
Should pay attention to the structure of the furniture is solid, a junction is tight. Small pieces of furniture in the cement floor mop in the selection, fall gently, crisp sound, explain quality is better; if the sound hoarse, have split Li Zhen pull murmur, that is not combined with tight mortise structure is not strong. The table and table can be shaken by hand to see if it is unstable. The sofa can sit, shake with, if not active, not weak, no sound, explain mortise structure, more reliable, if sit easily rattled loud, shake shake, a nail is live, it does not take a long time. Table, table, chair legs should have four triangular clip fixation, if not, the time long may fall apart.
Pay attention to the materials used in furniture. The surface materials of the furniture, with a hard Zamu asked, like ash, oak, relatively strong, capable of bearing load, and the internal materials of other materials are available. The thickness of the coat cabinet legs required to reach 2.5cm, too thick appear clumsy, thin and easy to bend deformation. Kitchen, bathroom cabinets can not be done with fiberboard, but should use the three plywood, because the fiber board water absorption, water will be swelling, damage. Check the surface, but also open the cupboard door, drawer door to see inside, there is no decay in the material, you can use a fingernail pinch pinch, pinch into the inside of the material on the rotten. After the doors opened with a nose to smell, if red nose, eyes, tears, that because the formaldehyde content is too high, will be harmful to the human body.
Attention should be paid to the moisture content of wood. High moisture content, the wood is easy to warp, deformation. The moisture content of furniture should not exceed 12%, the general consumers to buy, no test instrument, can adopt touch method, with his hand to the bottom surface of the furniture or unpainted place, if you feel dry, so the moisture content of at least 50% or more, can not be used. Another way is to have painted wood. Sprinkle a little water, if the slow down or not down, indicating high moisture content. Selection of wood-based panels have deformation, expansion, the phenomenon of the middle concave, indicating that the water absorption rate is too high.
