How to clean the filter cloth for desulfurization and dewatering machine?
General equipment with automatic cleaning device, it basically meet the cleaning requirements, more solid but a long time after the above filter residue easily, according to the physical properties of solids in the choice of suitable for cleaning and can be better
Horizontal screw centrifuge price is too high, I suggest you buy a car wash with high-pressure water gun cleaning, just a few hundred dollars in general.
The cloth wash machine production of Jiangsu wisdom can help you.I hope you will soon solve the problem
1, filter cloth service life is long enough (such as 1-3 years), then there is no way, 2, filter cloth did not wash clean, filter stop3, the crystallization is not good enough, such as particles are too small, or crystal containing impurities3, the use of poor quality filter cloth, structure, silk thread, hole, permeability and other unreasonable two, cleaningThe use of high-pressure water jet 10-20 bars, using washing powder water, manual cleaning (weak alkaline, pH 7-9).3, or dilute hydrochloric acid, but little effect!Three, improve the program 1, improve the flushing water pressure, 3-5bars, and continuous flushing, stop, must rinse.2, check nozzle working condition, ensure that each work properly, water jet fan angle 90 degrees is betterWashing nozzle and the angle of filter cloth is also very important, this need according to the filter cloth structure choice 4, filter cloth wash, generally use 2 row of pipe (first back, rear side). And some use 3 row, the effect will be betterIf possible, high pressure washing equipment can be used to increase the service life of the filter cloth by more than 2 times
