The more detailed the cleaning steps, the better
The following methods can also be used:The first step: Unplug the power plug, open the fountain behind the first sewage pipe net water discharge. Then turn on the water dispenser and switch off all the water.Second step: clamp the alcohol and cotton, carefully clean the inner side and the inner side of the lining of the water dispenser and the cover.The third step: preparation of disinfectant. The volume of the drinking water machine cavity is about 2 liters, and the food, tableware and disinfectant are selected according to the requirements of the instruction manual, and 2 litres of disinfectant are prepared, and the disinfectant is injected into the drinking machine cavity for 10~15 minutes.The fourth step: turn on all the switches of the water dispenser, including the drain pipe and the water switch, and clean the disinfectant.The fifth step: with 7~8 liters of water continuous washing water dispenser whole cavity, turn on all the switches, clean irrigation liquid.The sixth step: use alcohol cotton swab at the back wall of the switch.
The teapot and the water diversion machine have been used for a long time, and there will be a thick layer of scale in it. The lemon will be seeded and cut into half into the water separator or teapot for two or three hours, and the scale inside it will be less
After a while, then put these through the hot water gate to let go of these lemonade, and then put some water on the line once more ~ because it is fruit, it will not leave odor, tablet disinfection will have peculiar smell, wash N times will also taste ~!
Use a lemon to make juice, pour into the core, and then connected to the power, boil by hot water
