How to connect the curtain curtain and curtain hook
The sliding rail is composed of a slide rail and a fixed end, characterized in that the sliding rail has a concave-convex cross section, and the fixed end is a concave groove fixedly connected with the slide rail, and the lower end of the fixed end is fixedly arranged. Slide is one way to install curtains, and the other is Roman. There are two common types of curtain slides.
The track is not a walk above the curtains hook up on it
Generally have a sliding ring below the place where the hook
1, line positioning. Taking into account the fixed firmness, to avoid the spacing of the fixed parts can not withstand the tension, first measure the size of the required installation track, and then calculate the fixed pitch, the general spacing of the fixed parts of not more than 50 cm, and then line positioning, The accuracy of positioning is related to the success or failure of curtain installation.
2, the installation of fixed parts. General installation of fixed parts for the cement wall or roof need to add expansion screw.
3, wear pulley. When the window width is greater than 1200mm, the curtain rail should be broken, broken open simmer curved staggered, simmer curved should be smooth curve, lap length of not less than 200mm. To wear the pulley on the track, be sure to pay attention to the length of the track, the general specifications are: 1 meter long track to install seven pulleys, so as to ensure the installation of curtains after the size of the force and force of the uniformity.
4, the window rails installed pulley, in order to avoid the pulley from the track roll out, but also to avoid the corners of the track at both ends of the scratch to scratch the flaws in the window track at both ends of the seal with a seal, Then use a screw to seal the seal. 5, the convergence of the fixed card slot and track. Will be put on the pulley curtains into the fixed card slot, and then set the hoisting clip, so that the fixed pieces of the hoisting clip and track into 90 degrees, with screws will be hoisting clamp tightening, so that hoisting the clip firmly clinging to the curtain track.
