How to connect the lightning arrester of LED street lamp?
Protection end is divided into two, power supply side, if it is PVC line pipe, then in the bottom of the metal rod configuration protection rectifier power supply, constant current regulator source. Protection level is level 3-4.The fifth stage of LED is the lightning protection parts of lamps and lanterns, and the low-voltage potential precise clamping protection. Ensure 24V or 36V DC voltage safety. The tip here is an exact clamp.
The power lightning arrester we design must be one to 2 orders of magnitude, such as 10kA (20Amax),
What kinds of lightning arresters are included in the LED lightning protection device?As with other LED lamps, street lamps, the design itself has lightning arrester parts, whose parameters are usually 5kA, maximum 10kA, such protection in the usually large urban environment can be so, but the road, mountain, river water, lightning prone batter environment is not optimistic.
Return to a proposition. How to ground1, the lamp metal tube and the strip at the bottom of the rod grounding terminals properly connected, pay attention to the ground terminal can not save, ensure that the terminal is connected properly;2, lamp posts of movable tubes, bushings and other loose place, must be greater than 16mm woven belt two connections;3, the lamp holder and the lamp post connection must also be ditto;4. The lamp holder must have grounding terminals, and the grounding terminals must be properly connected with the lamp holder and the braid of the pole.
