How to correctly install the tool in the machining center
The cutter on the main shaft is automatically changed. The tool required to install it in daotao.
The main consideration is that the tool is long enough to expose the case as short as possible, as long as the clamping part.There is, do not have a barrel clamp damage.
First of all, to comply with the requirements of the equipment for the maximum weight, maximum length, maximum diameter of the tool. Then is to control the tool's circular beat, the circular beat bad influence the machining accuracy but also damage the spindle. The tool can not be installed loose, confirm the tool in the handle is solid, the handle should pay attention to the rust, rust handle influences the machining accuracy of spindle hole wall damage.
1, the tool is long enough to expose the case as short as possible, as long as the clamping part. In addition, there is no damage to the barrel clamp.2, the main shaft of the tool is automatic tool change. Tool is installed on the knife according to requirements.3, the maximum weight of the tool, the maximum length, the maximum diameter requirements. Then is to control the tool's circular beat, the circular beat bad influence the machining accuracy but also damage the spindle.4, installation tool is not loose, confirm the tool in the handle is solid, the handle should pay attention to the rust, rust handle influences the machining accuracy of spindle hole wall damage.
