How to detect the oil pressure sensor?
The old sensor detection method of VG1500090051J oil pressure sensor 1, a multimeter probe connected to G end figure, another one is connected to the case. The multimeter displays a value of 5-13 ohms as a good product. (as shown above) 2, multimeter connected to the other end - WK terminal, and the resistance between the shell of 0 is a good product. VG1500090060: 1 new oil pressure sensor, a multimeter probe connected to G end to the right end, the other end is connected with the shell. The multimeter displays a value of 5-13 ohms as a good product. (as shown above), 2, multimeter connected to the other end - left side, and the resistance between the shell of 0 is a good product. The water temperature sensor (VG1500090061 and VG614090067J 1, the same detection method) at room temperature multimeter a probe connected to G terminal (as shown on the right, wide, terminal) another probe connected to shell display resistance: 300 -1700 ohm, corresponding to the temperature range of 40-0 DEG C that qualified sensor. 2, further testing: the sensor head into hot water, such as resistance drops rapidly, indicating that the sensor is intact.
Sensors are usually paper cores or copper cores. If it fails, the pressure gauge indicates the needle points to the 0 scale
The sensor VG1500090051J detection method for old oil pressure sensor: 1, multimeter a probe connected to another end of G is connected to the case. The multimeter displays a value of 5-13 ohms as a good product. 2, multimeter connected to the other end - WK end, and the resistance between the shell is 0 ohms as a good product. VG1500090060: 1 new oil pressure sensor, a multimeter probe connected to G end to the right end, the other end is connected with the shell. The multimeter displays a value of 5-13 ohms as a good product. 2, multimeter connected to the other end - the left end, and the resistance between the shell is 0 ohms as a good product. The water temperature sensor (VG1500090061 and VG614090067J detection method of the same) 1, at room temperature the multimeter probe connected to a G terminal, a probe connected to shell display resistance: 300 -1700 ohm, corresponding to the temperature range of 40-0 DEG C that qualified sensor. 2, further testing: the sensor head into hot water, such as resistance drops rapidly, indicating that the sensor is intact.
