How to dismantle the solar vacuum tube

Answer:

Dry water. Push up the side of the tube. Remove the lower part of the tube from the retaining groove (note not to touch the tip). Then turn to the bottom, pull down the glass tube. Before installation, put some detergent (or soap water) on the nozzle, which is easy to insert into the water tank.

Step 2: turn the vacuum tube out of the base while turning. Step 3 the lower end of the vacuum tube is lifted and rotated. This can be, if it is difficult to turn on the syringe with a suction detergent into the vacuum tube and the barrel of the apron of the connection can be.

Step 1 holding the middle and upper part of the vacuum tube and the middle and the lower parts. Pay attention to the older the more powerful solar

First from the solar energy side of the first tube removed, because it is not easy to break the contact area of the vacuum tube