How to fix the thermostat for electric kettle?
Water does not turn off after boiling.The main reason is that the reset switch failed. The common reason is the serious deformation of the temperature sensitive film or the obstruction of the switch connecting rod. For the former, re bending angle of convex sense temperature, which push the switch rod action is normal; the latter need to find the blocked parts or foreign body, generally as long as the removal of foreign bodies and can resume normal position correction.
After heating, the heater is not heated, but the indicator light is on.The indicator light is on, indicating that the power supply has been added to the indicator circuit. The fault is that the common electric tube is damaged and contacted badly in the electric heating pipe or its connecting part. Remove the electric heat pipe and measure its resistance. Electric heating pipe damage, generally can only be replaced. Poor contact is mainly due to the serious corrosion or deformation of the contact reed in the power plug assembly. The switch box can be disassembled for cleaning and repair, and the damaged parts are best replaced.
The first check is that the heating wire is broken, or the thermostat is not working General "thermostat", the bad situation is more. Go and buy a thermostat.
