How to fix the water tap of the water dispenser?

Answer:

Failure reason: the silica gel tube in the water dispenser is loose because of transportation.Remedy: turn back, see which interface a Water Leakage, direct observation or water after find out, with a new line or tie line will be set to the silicone tube in the interface. After cleaning, dry the parts in the water machine with a dry cloth.

Tap water seepage of water dispenser:Failure cause:(1) the handle will tighten the faucet;(2): tap the button will twist teeth.Removal method:Tighten the red or blue part of the faucet clockwise to fasten the faucet. Or counterclockwise unscrew the hand, adjust the silicone tube and spring tap, and then re tighten the faucet; also can let the customer service service personnel door to replace the tap or replace the entire faucet open rear handle.

Water tap dripping of water dispenser:(1) the cause of the failure: the float valve of the water purifier is not properly installed; when the water tank is full of water, the float valve can not stop the water flowing from the lower barrel of the water purifier, and the water leakage is caused.To remove the method: re install the float valve, and first tap the tap to test whether it is working properly, and then placed in the water dispenser;