How to get set-top box remote control learning
1: the set-top box remote control with the original TV remote control, infrared emission tube aligned at the same straight line, the distance is not more than 5 cm.2: hold the set-top box remote learning "Settings" button for 3 seconds, see the lights on the remote control and change slightly dark bright and often bright, then press the set-top box remote learning to learn keys, such as "TV power button", see the lights to flicker, Press TV remote control machine the corresponding "TV power button", until the set-top box type learning indicator light on the remote back lit, then click on the remote learning "Settings" button, the light is off, the success of a learning.3: the first to try on TV just learning the successful key is available, if not repeat it again (Note: some basic with a TV remote control in heavy on learning may not always learning success or a few days after the success and failure, you only find the original remote control TV for the new study).4: continue to complete the study of other keys. (learning remote control), in general, only learn the original TV remote control "TV power", "volume or channel", "TV/AV switching key")
Use the set-top box learning remote control to learn (TV) remote control method is as follows:1. Hold down the "SET" button on the top of the learning remote controller (set-top box) for about 2 seconds. Wait until the red light is long and then release the "SET" setting button. At this point, the remote control is on standby;2. Press the standby button of the remote control of the TV set, and the learning remote control indicator light flashes, then press the standby button of the learning remote control learning area, then the indicator lamp will turn on frequently;3, after learning a key, you can choose other keys to learn (e.g., change keys), and so on;4, after learning successfully, press the set-top box remote control to control the TV set.
First, press the setting button on the top of the set-top box remote control for 3 seconds, the indicator light turns green (different brand, indicator light color is not the same). Put the remote control of the set-top box, remote control and TV set on front end 3-5mm.Then press the power button on the original TV remote control, now the new set-top box remote control indicator lights red, and then press the power button on the set-top box remote control, the indicator light turns green. Other sound keys, AV keys, are set in one-to-one correspondence with the same method.Finally, after setting all the buttons, do not take any action, and then the green indicator on the remote control will be set off successfully..I'm using ZTE's set-top box. Other brands operate roughly the same.Hope to help you
