How to identify the quality of ceramic tile and standard
Precautions:
1. When the decoration of the house, choose the right material is very important, when people buy tiles, often businesses will use this method to guide consumers to identify the quality of tiles: water seepage, water absorption is high, , Water absorption is low.
2. When purchasing tiles, be sure to identify the quality of the tile, select the regular product and with the correct identification method, pay attention to the construction of tiles to comply with product use instructions, to avoid the wrong method led to tile deformation and loosening.
Ceramic tile quality identification and standards are as follows:
(1) glazed: carefully watch the glazed, glazed should be smooth, delicate;
(2) color: a few pieces of ceramic tile together, in the light under a careful look, a good product color is very small. The color between the products are basically the same: the poor product color difference, the color shades of different;
(3) porcelain degree: the color of the tiles, color clear and natural, that porcelain high degree of color is not clear, the porcelain degree is low;
4) color: color patterns to be delicate, realistic, no obvious lack of color, broken, dislocation and other defects;
(5) water absorption: the number of drops on the back of the tiles of tea juice or water, to be a few minutes later, depending on the degree of diffusion of water droplets, non-absorbent or low water quality is good quality;
(6) hardness: percussion tiles to listen to the sound is crisp, the sound more crisp, porcelain degree, the higher the density, good hardness;
(7) abrasion resistance: to scratch the tiles with sharp objects to observe whether it is scratched, if scratched, said the glaze wear resistance is easy, easy to slip, and the surface of the glaze polished, the brick surface Dirty will not be clean;
(8) glazed pinhole: buy, within one meter to observe the surface with a pinhole, if any, that glaze is not fully integrated, easy to produce accumulation of dirt situation;
(9) flatness: to see whether the naked eye tile side is straight, if the war situation is serious, will affect the future of the solid tiles paving;
(10) Size deviation: Tile specifications can be measured with a caliper, good product specifications are small, paving products after the uniform, straight brick, decorative effect is good; poor product specifications deviation, product size is different;
(11) color selection: the color of the external walls should be coordinated with the surrounding environment, high-rise buildings generally should not use white or too light-colored decorative wall, in order to avoid the building lack of texture: in the interior decoration. Floor tiles and inner wall tiles to coordinate with each other;
(12) the choice of tile types: to use the specific environment to choose tiles, such as the living room should choose a larger size of polished tiles or antique tiles, and the kitchen and the best choice for non-slip, easy to clean the whole body bricks.
