How to improve the oil leakage line
Adjust the work pressure so that it can satisfy the work while not causing high pressure on the pipe. The sealing design is not reasonable, not meet the work pressure requirement.
Hydraulic cylinder oil leak, should be hydraulic cylinder seal damaged, want to replace seal, also check hydraulic cylinder piston Wear and burrs, piston wear and burrs are easily damaged by sealing, causing oil leakage. If you have That requires a new hydraulic cylinder or professional maintenance.
If it's an interface leak, you need to check if the interface is loose and the seal is broken. Or the interface design is not reasonable, you need to improve the interface.
The line itself I think should be no problem, I don't know where your oil spill is. I think it's an interface leak, Or a hydraulic cylinder leak, And is your job stress reasonable? Is it too stressed?
The reason of oil leakage is complicated, mainly due to the quality of the hydraulic components, vibration, corrosion, differential pressure, pipeline connection, use of improper maintenance. Elevator oil leak inside leakage and leakage. A small amount of oil is inevitable, because of the nature of the hydraulic drive. Spill in excess of the prescribed index of the phenomenon is due to leakage, generally can immediately perceptible, mainly are now the pressure drops, rapid speed of change has been ground or surface of product oil, machine equipment need often fill oil to return to the height of the aerial work platform before. Once the leak is due to be shut down, the acute operation will only take the system out and damage the engine parts.
