How to install aluminum alloy decorative panels?
Aluminum alloy decorative plate varieties, specifications and colors by the design Lai Ding, generally by the vertical installation of the board on the wall.
Install the aluminum alloy decorative panels of the wall to be done in advance 15mm thick 1: 3 cement mortar leveling layer.
To be cement mortar leveling layer after hardening, 500mm per hole in the wall drilling, aperture of about lOmm, in order to plug the steel expansion bolts.
Ready to keel, keel can be cold-formed actinized keel or aluminum alloy keel, keel height is appropriate 60mm, width is appropriate 30mm wall thickness 2.5mm. Punch holes in the keel. When the keel is installed, insert the steel swivel bolt into the wall and drill the keel
Hole into the bolt, add nuts and washers, tighten the nut, the keel fixed to the wall. The keel should be installed horizontally.
Keel installation by checking the correct, you can install the aluminum alloy plate to the keel up. Aluminum alloy decorative plate fixed on the keel method can be used M4 × 6.5 aluminum alloy pull rivets (plus steel card) or use M4 × 15 tapping screws. Aluminum alloy decorative panels should be installed vertically, the board and the keel contact, at least have a pull rivets or tapping screws fixed.
The method of fixing the slats on a specially made keel
Will be stuck in the keel, keel and base fixed. The keel is stamped from galvanized steel sheet, and when the slats are installed, the slats are placed on top of the keel. This method is simple, reliable, easy to replace.
The above is only one of the said, in fact, many forms of keel, slats cross-section varied, but no matter what kind of cross-section, need to use keel and lath supporting. Keel can be fixed directly with the structure, the keel can also be fixed on the frame, that is, before the keel is not well, should be good structure, and then the keel fixed on the frame.
