How to install antiseptic wood vines
Materials to be prepared:
1: the general anti-corrosion wooden vines are four columns, two column beams (that is, two pillars attached to the post, because it is connected to the stability of the column, so that column beam), the rest of the blade in the top See how B side of the provisions (because some of the wide point, and some to point, of course, if you have prepared the specifications of the blade, only with B that this is the standard specifications).
2: a bag of cement, small bags of sand four bags.
3: outdoor weathering wood oil.
4: move the ladder.
Tools to be prepared:
Fixed cutting machine, moving cutting machine, curve saw, grinding machine, drill, drill, hammer, horizontal pipe, level ruler, shovel, rasp.
4: to draw the column beam you plan the blade of each seat of the gap, and then to the blade processing, give the blade to draw a mouth, that is, the width of the column beam, painted on the blade (like a cross, open a Mouth, just let them all want to be together), and then move the cutting machine openings, and then the file to the mouth file flat.
5: generally do antiseptic wood vintage for the appearance of the blade in the head will open a bend, then you need to operate the curve of the play.
6: give the two columns put the column beam, then put the above superimposed good mouth of the blade, the first release from the pillars of the recent two mouth, so that a trend can be a word word stability, of course, is best to four Pillars are fixed with wood, everything has been stable, after all, is the wood, which part of the body to tie the body.
7: the last two steps to do, preferably the first tank of cement, and then to support the ladder to the wood, the general to the next day and then remove the fixed plate.
Production process:
1: to all the wood preservative wood are polished once, or in the wood are processed after the touch can also be (the purpose is to keep the surface smooth).
2: first digging the specifications within the range of the column hole, the general hole can be dug as deep, of course, this is in line with the requirements of the specifications to be more standardized, and then the width of the hole with the column length and width to set, Such as 20 * 20 wood to do the column, then the hole will need 40 * 40, leaving the gap to the tank cement to make some space.
3: to the top of the pillar saw a mouth (the role of the mouth is the column beam, so to play a certain stability), two two open a direction of the mouth, because the two pillars are connected by a beam.
