How to install tent mosquito net?
1, first of all: 3 pipe with screws and 2 sides of the pipe 2 docking fixed; pipe No. 4 are connected to the screws with screws on both sides of the pipe socket screw holes (Note: Velcro affixed to the inside)2, and finally: the long shape guard inlay glue is connected and installed on the 3 pipe to the interface, and the guide rail is butted parallel and pulled smoothly.
Installation of mosquito net support:The fitted double track frame is connected with the upper part of the plum blossom seat by screws.The installation method of a new type of dual decorative nets and decorative curtain: lug 1. nets on the edge of both sides of the curtain are respectively hung on the hook on the socket, then the curtain on the edge of the hook in order to wear the nets hung on the pulley hole; a first hook in the front curtain hanging on both sides of the mosquito net
Installation of plum blossom base:1, in a highly satisfactory choice and positioning of the borehole, the plum blossom nail pull explosion base is fixed on the wall (recommended installation of bracket height from the ground 2.3 meters to 2.5 meters in height) installation width of mosquito net bracket is based on the actual size of a mosquito net bracket shall prevail;Note: before installing the wall, measure the width of the pre installed frame, and then drill the wall in actual size.
1, remove the nets in the lay flat, then folding curtain rod into two strip2. The two tubes are sequentially inserted into the cloth sleeve at the upper end of the mosquito net. After the mosquito net is opened, the head of the two struts is inserted into the hole, and the assembly is very simple, and the utility model can avoid the peg hook and the bad decoration, and the utility model is very practical mosquito net.3. (Note: the two pipe is cross mounted. Please take care of the carbon fiber holder during installation so as not to hurt your finger. )
