Home > categories > Machinery & Equipment > Hoists > How to install the anti-falling device?
Question:

How to install the anti-falling device?

How to install the anti-falling device?

Answer:

The speed limiter is the standard elevator configuration. Your elevator is not a ladder for electric gourds!!! Electric gourds don't need safety tongs! There is a brake in itself! Safety tongs are like a vehicle's seatbelt, which can be jammed too fast. There is no buffer distance, and once the car is falling fast, it will die. Gradually, there is a buffer distance, and the car will be accelerated to a certain speed during the fall.
There must be a car in the elevator. Since there is an elevator T89 guide. We can buy wedge type instantaneous type safety pliers, wedge type progressive safety tongs, roller type instant safety tongs, roller type progressive safety tongs. Install a safety clamp on each side of the car that has a guide track. The tongs should be installed and adjusted vertically! The electric gourd itself has a brake device, which can cause a drop if the load is more than the weight of the electric block. If there is no more than a drop in the trunk, the brake problem of the electric hoist itself can adjust the brake on the head of the motor. If you don't understand the message, please take it!
Equipped with speed limiter safety tongs, it is mainly to solve the big tonnage of electric hoist. 2, add the construction elevator to use the eccentric gear. For also called speed difference, can in a limited range rapid brake locks falling objects, suitable for lifting goods, protect the ground operation staff's life safety and suspended artifacts damaged object.
Equipped with speed limiter safety tongs, it is mainly to solve the big tonnage of electric hoist. Next to the electric gourd is the speed limiter, which is linked to the safety tong at the bottom of the bottom 2 car.

Share to: