How to install the external turning tool
Vertical installation of the tool rack and workpiece, and the height of the tool center (the installation line on the middle skateboard)
The size of the tank and the amount of the knife can be combined to produce the spring debris. The slot is big, the shavings are small, the slotted shavings, the grooves and the blade are well matched -- the spring chips. Of course, the depth of the slot is also required.
Steps: The tip of the knife is about one to two millimeters above the workpiece. The cutter should not be perpendicular to the workpiece, the resistance is large. 3, props slightly backwards to reduce resistance. 4, the less the knife stick, the better the blade should not be too weak, at least with two screws. Supplement: About 90 degrees f: Inner 8: the slot of the former small size, groove deep 1 to 2mm. Outer 8: the slot of the former big, groove deep 1 to 2 millimeter.
