How to install the hanging advertising lamp box correctly
4, connection: the outlet box at the back of the normal power line, if the power in the box on the back of the scene, can cut off the power line plug, direct connection, and will use the insulating tape with joint power; if the power in the light box installation location outside, can be connected to the power outlet line in the light box edge. Then the three-phase plug is inserted into the power socket with the;5 、 fixed lamp box: open the upper cover of the light box, install the fixed point (drilling hole in the light box base, power line), re install the power line, adjust it to a horizontal state with a level gauge;6. Switch on the light and clean the light box surface.
Wall installation advertisements should pay attention to many factors, to introduce the signage Meinuo heart fixed method:1, first of all, determine the location of light box installation, according to the actual situation and light box varieties to determine the installation method.2 、 measurement size: according to the back of the lamp box installation hole position or actual size of the site to determine the fixed point of the installation lamp box.
3, fixed lamp box:A) the wall is made of aluminium plastic board, wood block, iron plate and so on, and can be directly fixed with self tapping screw;B) the wall is made of cement or brick walls, which can be punched with percussion drill and then fixed with expansion screws;(C) the wall is tiled, marble, glass, etc., you can drill through the surface with a glass drill, then drill the expansion screw hole, then fix the light box or use the adhesive way.(D) the lamp house that needs lifting or hanging on the spot, after selecting the good installation position, press the actual size of the installation hole of the light box to determine the fixing point of the installation lamp box, and then install the hanging piece to connect the ground wire.
