Home > categories > Construction & Real Estate > Door & Window Hinges > How to install the hinges on the house door
Question:

How to install the hinges on the house door

The hinge of our dormitory door was broken, and the door of the dwelling place was broken, so I bought a new hinge, opened a slot on the door, But after the door is not closed, the new home page seems to be more than the door wide out of the door, did not change the page is good, just right So do not know how to install the hinge, please enlighten me, is not the hinge on the side of the pillar than the door frame than a lot of ah?

Answer:

Look at how the original installed, take the original hinge, buy the same specifications
If you do not buy the following is a technical live you'd better find a tool for the carpenter master Is to shovel out some of the wood on the door is probably the thickness of the hinge
Door hinge installation process is not complicated, can be divided into the following five steps: 1, prepare the tool Before installation, prepare a special installation tools, such as the measurement of the tape / level, the line positioning of the carpentry pencil, hole with the woodworking hole / pistol drill, fixed with a screwdriver and so on. 2, drawing line positioning First, with the installation of measuring board or woodworking pencil alignment (drilling margins are generally 5 mm), and then pistol drill or woodworking hole in the door to play 35 mm hinge cup mounting hole, drilling depth is generally 12 mm ; 3, fixed hinge cup (hinge products) The hinge into the hinge hole on the door plate and fix the hinge cup with the tapping screw; 4, fixed base Hinge embedded in the door cup hole after the hinge to open, and then set and align the side plate, with the self-tapping screws to the base fixed; 5, debugging effect The last step, open and close the door test results. The general hinge can be six-way adjustment, up and down alignment, two doors around moderate, the door will be the best ideal debugging, installed after closing the gap is generally 2 mm.

Share to: