How to install the wire spring of electric kettle switch?
Install the fulcrum of bimetal and switch on, then the coil is placed in front of the hook, and the end of the opening towards the switch seat, no opening side ahead, hung on the hook switch button on the front.Then press to try, and if you feel the stretch, and can keep open and close state, basically.Then boil the water, try to see if the water can be opened after tripping, if the water does not jump after 1~2 minutes, that is, the bimetallic plate position is wrong, and then reinstall. (with).
The metal sheet you are talking about may be a temperature sensitive bimetallic strip that uses different designs of different metals that vary with temperature. As the water temperature rises, the sheet metal distorts and bends and drives the switch to bounce off power. Suggest that you go to the professional maintenance department for maintenance, to ensure the safety of use.
The reset switch of the electric kettle is divided into several parts: a spring ring, a bimetallic plate, a contact switch, a switch key, etc..
