How to maintain the cone crusher in daily use?
1., there should be iron removal device, to prevent the broken cavity iron, and if frequent iron, it may cause shaft fracture accident.2., to full load production, otherwise the product will appear rough.3., the crushing ratio distribution in the production line should be reasonable, so as to maximize the efficiency of the crusher.4. spring pressure can not be too tight, too much pressure will occur shaft breaking accident, the pressure is too small, the spring will frequent beating, affecting the normal work of the crusher, and the product size coarse.5., the temperature of the lubricant can not be too high or too low, otherwise it will affect the operation of the machine.6. oil often needs to change, not too dirty, too dirty bowl, and will accelerate the gear sleeve wear, even die sleeve research.
Cone crusher in the actual operation process, there will be such and such problems, depending on the specific situation is not the same, we must adopt different solutions, here introduced only the actual operation often see some of the situation.
The driving belt is installed not too tight, otherwise it will cause the drive shaft rotation is not flexible or fracture; not too loose, otherwise it will cause the broken machine boring car.8., feeding can not be too wet, too sticky, fine particles can not be too much, and can not be too large, otherwise it will cause stuffy car.9. crushing and discharging of the crusher will cause boring cars.