How to maintain the injection molding machine?
The inspection before use is mainly divided into the following steps:1, first of all, check the fuel tank to determine the amount of oil in the standard2. Then check the room heat and oil temperature. The oil should be preheated at room temperature. The room temperature should be treated as heat sink3, and finally check the pressure gauge, whether the swing is serious, can return to zero and mileage statusThe inspection in use is divided into the following steps1. start, overflow valve to minimum pressure2. check and adjust the regulating pressure of overflow valve, whether the continuous rise and fall evenly, all normal, and then transferred to set pressure3. oil pump oil shell electromagnet inspection, the oil temperature 20 degrees -50 degree is normal, the pump shell temperature is 10 degrees higher than the room temperature, -30 degree is normal4. oil leak check5. noise and vibration inspection6. pressure gauge check7. the work of electrical components and the reliability of safety devices are examined8. the fastening nut and screw of each column and cylinder element are looseAfter use, that is, after checking downtime:1. tank oil surface inspection2. check the hydraulic components3., the valve handle position should be restored to the "pressure relief", "stop", "back" position.4. check whether the control switch button and electrical components are loose and sensitive5. machine column and oil bearing movable connection, moving parts filling lubricating oil6. turn off the power and do the work safely
