How to mend cracks in a plastic bucket?
AB is a nickname for the two liquid mixed hardening glue, the glue is a liquid, a liquid hardener, two feed to hardening, is not required by the temperature should be hard ripening, so it is a kind of adhesive curing at room temperature, the model is sometimes used to do. Generally used in industry.
Bad mouth at the pelvic floor or waist, it is best to change the new. Because the adhesive parts are not resistant to water pressure, and where there is adhesive, there is a crumb of rubber, etc. things will stick on it.
Depending on the material of the plastic tub and the location of the hole:If the plastic is PP, only hot melt, the home unconditionally;If HIPS, GPPS, ABS ab.
AB is a two-component adhesive. A commercially available acrylic acid, epoxy, polyurethane and other components of the AB. Different from the conventional large cans for factory use (1 kg /2 kg set) epoxy resin tubes called AB (cute names on the box).
