How to operate the 6090 woodworking engraving machine Weihong control system
Click again. Check whether the normal operation of the simulation in which Weihong7. if 6 is normal, click start [note spindle speed of 22 thousand rpm. The processing speed of 100%---120%]8. wait for the carving to complete
In the open file loading and Weihong(2. to X.Y.Z cleared after the origin of coordinates)3. click the simulation [view in the motion control system is normal file carving]4. if third steps is normal, then rotate the spindle, spindle start, and then click on the manual by direction key 8*2 6*4 9*1 to control the engraving machine to find the origin on the boards.5. again cleared X.Y.Z [this is] the origin and the origin of the machine to ensure consistency in the document and the origin of Weihong wood
The Thai dispatched insideOpen the Thai2. suites (the layout should be consistent and the carving material)3. in typesetting4. cut 2D 3D and so on5. use a magnifying glass to check the path there is no problem6. output engraving path
