How to pick up the rear view camera
Generally divided into two kinds: one installed in the position of the license plate lights, this installation is relatively easy, just use the camera accessories inside the small screws to fix the camera in the position of the license plate can be through the accessories in the iron Film or gasket adjustment, so that the camera to achieve the best reversing viewing angle
Reverse the camera installation steps: the first step first remove the car battery power supply connection, and remove the connection away from the electrode to prevent the power supply accidentally connected the second step to determine the car camera installation location
The camera line through the license plate gap into the car, and the reversing lamp power and video extension cable connection This type of installation of the reverse camera is the current One of the more popular, the more subtle appearance, the installation is more relaxed The other is the installation of drilling, embedded inside the bumper, the benefits of this method is not in the car after the metal parts drillingBecause the bumper is plastic And the camera line is also relatively easyThird step will be the camera's power cord and the car after the reversing lamp power cord connection Then the camera's video cable and video extension cable connected to the other end of the video extension Car display AV input connected to the final recovery of the battery-powered, start the car, put on the reverse gear, you can see the car display on the reversing image Note: 1 can not rely entirely on the reverse rear view system, and only Can be regarded as a reversing auxiliary tool 2 Car display must be properly connected, if the monitor does not provide AV input interface, you must find the appropriate video cable or install the video switching device so that the rear view of the normal display Do not easily connect the car power supply directly to the car battery power, so as to avoid power instability
