How to prevent aluminum foil from wrinkling?
Due to the strip shape is serious bad, folding formed in the process of aluminum foil coiling or expanding. Its essence is that its tension is not enough to make the box surface flattening. For a device with the tension of 20 mpa, the box surface flatness shall not be greater than 301. When it is more than 301, it will wrinkle inevitably. Due to the rolling aluminum box often bear the bigger tension than follow-up processing, some aluminum foil that just show the bad strip shape when rolling turn to wrinkle when cutting or used after annealing. Main reasons of wrinkling are due to poor flatness controlling, including incorrect roll grinding ,unreasonable roll shape controlling, unreasonable parameter controlling of rolling and cutting process, bad incoming material strip shape and incorrect strip shape adjusting and imperfect precision of sleeve or tube core. Main reasons of wrinkles: The large amount of pressure make the rolling uneven or coiling lack tension. Improper controlling of roll shape or rolling pressure is too low; Uneven thickness of billet, bad flatness or shear wave. Winding shaft precision is not good and the sleeve is not round. Improper control of pressing roller pressure.
