How to protect the outdoor wood products? What kind of paint can be anti-corrosion? How to build?
6. Wiping before the first clean cloth evenly, will be too much part of the wax oil; rubbing when the force should be uniform, can not be too heavy or too light, the first to be painted surface alternately Wipe a few times, the final ending when the direction of smooth rubbing wood, so that the full access to wood grain wood, standing dry; to be dry surface, in the surface of the paint was gently polished, wiped, the same steps once.
4. Before use, stir evenly, no need to dilute; if the product viscosity is high, but also into a small amount of special thinner, adding the amount should not exceed 10%.
5. Brush need to use soft brown hair brush, along the direction of wood texture evenly, thin brush again, after brushing to remove excess wood wax, brushing the amount must be less, can not be painted too thick; to be hard after the surface, Paint gently polished, wipe, 12 hours can be painted the second time.
First, the outdoor wood products with wood wax can be anti-corrosion.
Second, the construction process is as follows. The following are the same as the "
1. Must be processed at temperatures above 8 ° C.
2. The wood must be dry and the maximum moisture content should not exceed 15%.
3. Texture of wood wax before the wood surface must be polished with fine sand, and wipe to the surface smooth. Wood surface if the fiber can be used wood sandpaper P240 or above gently sanding.
