Home > categories > Construction & Real Estate > Marble > How to remove marble stains
Question:

How to remove marble stains

How to remove marble stains

Answer:

1 acid stain. It is better to blot out stains than to wipe them out, because they can cause the spread of stains. Most of the vinegar or fruit juice stains can be removed by baking powder and baking soda paste. When the paste is dry and hard, wipe off the paste with a wet towel, and then dry with a dry towel.2 food stains. For hardened food stains, can be used to remove hydrogen peroxide, but the time should not be too long. Once the stain disappears, wipe it clean with a wet rag and dry it.3 grease stains. Use paper towels to absorb oils and fats, which can then be used as an absorbent, such as white powder. Place 1 to 2 hours. Then wipe with a wet cloth, and finally dry.4 nail polish stains. Drop a few drops of dishwashing liquid in about half a liter of warm water and wipe with a clean white cloth. Do not leave the dishwashing liquid, wipe off the residual liquid with another wet rag and dry it. Clean up until the stains are completely removed.
1 first remove the dust and dirt on the stone surface;2 will be diluted after the cleaning agent brushing or spraying in the macula and stains on the surface, with white pure cotton cloth or white toilet paper and other absorbent material close to the stone surface, add detergent to make it completely wet;3 cover the plastic film on the marble to maintain the cleaning agent;4 about 24 hours after the removal of plastic sheeting and covered with cloth or paper, washed with water several times;5 if the yellow stains can not be completely removed, can be repeated in accordance with the above method.
Can be cleaned with marble professional cleaning agent, it can penetrate into the carbonate stone such as marble, limestone, dolomite, serpentine microporous clear tea, coffee, straw yellow and other macular and stain, no damage to the stone surface gloss, not in stone internal residual pigment.

Share to: